User`s guide

8 Installing the External ATI Graphics Card
1 Power-off the computer and monitor, and then disconnect
the monitor cable from the back of your computer.
2 Remove the computer cover. If necessary, consult your
computer’s manual for help in removing the cover.
3 After locating the AGP slot, and if necessary, removing the
metal cover, align your ATI graphics card with the slot, and
then press it in firmly until the card is fully seated.
4 Replace the screw to fasten the card in place, and then
replace the computer cover.
5 Connect one display to the motherboard’s internal graphics
connector , and then connect the other two displays to
the external graphics card monitor connectors and .
If your monitors use DVI-I connectors, you will need
DVI-I-to-VGA adapters to connect them. Adapters are
available from the online ATI store at
http://www.ati.com/online/accessories.
You are now ready to enable SURROUNDVIEW™. See
page 9.
Discharge your body’s static electricity by touching
the metal surface of the computer chassis.
A
B C
A
B C
Monitor Connectors on back of computer
DVI-I Connector
from monitor
DVI-I to VGA
Adapter
VGA Connector
on Card