User`s guide

38 Using Your ALL-IN-WONDER
Using SCART connectors
for European televisions
The SCART connector supports only the Composite video
format, which is the most common type. The above illustration
shows how to connect to an SCART connector with a
Composite cable.
If your television supports S-Video input, you should use an
S-Video cable (available in most consumer electronics stores) to
view your PC on a television. An S-Video connection produces
a higher quality display than Composite video.
Using and adjusting TV Out
To enable and disable the television display
1
Start Windows
®
.
2
Click Start.
3
Point to Settings, then click Control Panel.
4
Double-click Display.
5
Click the ATI D ispl a y s tab.
Windows
®
98 users click the Advanced… button, then click
the ATI Displays tab.
6
Click the green enable/disable button next to the word
“TV” to enable/disable television display.
7
Click OK or Apply to save the changes you have made.
For information about how to use television display and the
ATI Displays Properties page, click the Help button.
Using an SCART connector with a Composite cable
Connect to
TV or VCR
Audio In
(
Right = Red)
(Left = White)
SCART
Connector
Video In (Yellow)
Cable 1
Cable 2
Connect to
graphics card
Connect to
audio source