User`s guide

Installing the Hardware and Software 23
To install the ATI enhanced drivers
for Windows
®
2000
1
Insert the ATI INSTALLATION CD-ROM into your
CD-ROM drive.
If Windows
®
runs the CD-ROM automatically, proceed to
Step 6.
2
Click Start.
3
Click Run.
4
Type the following:
D:\ATISETUP
(If D is not your CD-ROM drive, substitute D with the
correct drive letter.)
5
Click OK.
6
Click ATI Easy Install to start the Installation Wizard.
7
Follow the Wizard’s on-screen instructions to complete the
installation.
8
When the Setup Complete screen appears, click Yes to
restart your computer, remove the ATI INSTALLATION
CD-ROM, then click Finish.
The first time you restart your computer, more drivers will
automatically be installed.
For correct resolution and refresh rate operation, you need
to select a display device. You should also change the color
palette from 256 colors (the default) to a higher number of
colors. ATI recommends at least “High Color (16-bit)” for
best performance with its multimedia applications.
Note
Your ALL-IN-WONDER card must be the primary
display (see Multiple monitor support on page 14)
for correct operation of TV and video functions.