User`s guide

16 Installing the Hardware and Software
Plug the monitor cable into your card (if you are running
multiple monitors, connect their cables to the appropriate
connectors), then turn on the computer and monitor(s).
If your ALL-IN-WONDER RADEON card has a DVI-I
connector, you can connect a flat panel to it, as shown
below. To connect a VGA monitor to the DVI-I connector,
plug the supplied DVI-I-to-VGA adapter into the DVI-I
connector, then plug your monitor cable into the adapter.
Y
ou are now ready to proceed with the installation of ATI’s
enhanced drivers. For detailed instructions, select your
operating system from the list below:
• Windows
®
98/Millennium Edition, see Windows® “New
Hardware Found” on page 17.
• Windows
®
2000, see page 21.
6
Make sure
your
monitor
cable is
securely
fastened.
DISPLAY CABLE
TO VGA MONITOR
TO F L AT PA N E L D I SP L AY
(DVI-READY CARDS ONLY)
DVI-I-TO-VGA
ADAPTER
DVI-I
CONNECTOR
VGA
CONNECTOR
ON CARD
FROM
MONITOR