User`s guide

46 Reference
Troubleshooting Tips
The following troubleshooting tips may help you if you
experience problems. Contact your dealer for more advanced
troubleshooting information.
Basic troubleshooting tips
• Check that the
card is seated properly
in its expansion slot.
If the problem still exists, try a different PCI expansion slot.
• Ensure that the
monitor cable is securely fastened
to the
card.
• Make sure that the
monitor and computer are plugged in
and
receiving power
.
• For Windows
®
95 / Windows
®
98,
disable any built-in
graphics capabilities
on your mother board. For more
information, see your computer documentation.
• Make sure that you selected the
appropriate monitor
when
you installed your enhanced driver.
• If you use an indoor antenna, you will get the best results
with an
amplified
model. Place it as
far away from the PC
monitor
as possible, to avoid interference.
• Splitting the cable or antenna input can reduce the signal
quality. For the best reception,
connect the cable or
antenna directly to your card
.
• Make sure that your
audio card’s line input is active
(see
Windows® 95 / Windows® 98 Volume Control on page 25).