User`s guide

32 Using Your ALL-IN-WONDER 128 or ALL-IN-WONDER 128
Using SCART connectors for European televisions
The SCART connector supports only the Composite video
format, which is the most common type. The above illustration
shows how to connect to an SCART connector with a
Composite cable.
If your television supports S-Video (also called S-VHS) video
input, you should use an S-Video cable (available in most
consumer electronics stores) to view your PC on a television.
An S-Video connection produces a higher quality display than
Composite video.
Using and Adjusting TV Out
To enable and disable the television display
1
Start Windows
®
.
2
Click
Start
.
3
Point to
Settings
, then click
Control Panel
.
4
Double-click
Display
.
5
Click the
ATI Displays
tab.
Windows
®
98 users click the
Advanced…
button, then click
the
ATI Displays
tab.
6
Click the green
enable/disable
button next to the word
“TV” to enable/disable television display.
7
Click
OK
or
Apply
to save the changes you have made.
For information about how to use television display and the
ATI Displays Properties page, click the
Help
button.
Using an SCART connector with a Composite cable
Connect to
TV or VCR
Audio In
(
Right = Red)
(Left = White)
SCART
Connector
Video In (Yellow)
Cable 1
Cable 2
Connect to
graphics card
Connect to
audio source