User`s guide

16 Installing the Hardware and Software
Windows
®
“New Hardware Found”
If you are running Windows
®
95 or Windows
®
98, new hardware
may be detected after you restart your computer. Follow the
step-by-step instructions below to allow Windows
®
to correctly
identify your new hardware.
To identify new hardware in
Windows
®
95
1
Windows
®
95 briefly displays the “New Hardware Found”
dialog before launching the “Update Device Driver
Wizard”.
If the wizard does not appear, proceed directly to
Installing
Enhanced Drivers for Windows® 95 and Windows® 98
on
page 18.
2
Click
Next
.
3
Click
Finish
.
4
Insert your Windows
®
95 CD-ROM into your CD-ROM
drive.
5
Click
OK
.
6
Type the following:
D:\WIN95
(If
D
is not your CD-ROM drive, substitute
D
with the
correct drive letter.)
7
Click
OK
.
8
Click
Yes
to restart your computer.
You are now ready to install your ATI enhanced drivers.
Proceed to Installing Enhanced Drivers for Windows® 95 and
Windows® 98 on page 18, and follow the step-by-step
instructions to complete the installation.
To identify new hardware in
Windows
®
98
After restarting your system, Windows
®
98 will briefly display
the “New Hardware Found” dialog. Depending on your new
hardware, you will either be prompted to insert your Windows
®
98 CD-ROM or Windows
®
98 will launch the “Add New
Hardware Wizard”.