User's Manual

ManualsBrandsATI Electronics ManualsAudio EquipmentBluetooth Speaker

Vivitar® Inﬁnite BS-C26 Bluetooth® Speaker

User Guide

Thank you for purchasing the Vivitar® Inﬁnite BS-C26 Bluetooth® Speaker.

Introducon

With this speaker, you will enjoy listening to high quality music wirelessly using Bluetooth®

technology. Easily connect to any mobile device for both conversaon and music listening. It

also pairs with other Bluetooth-enabled devices (Bluetooth V2.1+EDR speciﬁcaon and HSP,

HFP, A2DP and AVRCP proﬁles).

Speciﬁcaons

• Bluetooth Speciﬁcaon: V2.1+EDR

• Operaon Frequency: 2.402-2.48GHz

• Supported Proﬁle: HSP, HFP, A2DP, AVRCP

• Operaon Range: Up to 33 feet (10 meters)

• Talk Time: 4 hours

• Play Time: 2 hours

• Standby Time: 15 hours

• Baery Type: 400mAh, 3.7V, Polymer Lithium Ion Baery

• Charge Time: 3 Hours

In the Box

• BS-C26 Bluetooth® Speaker

• USB Charging Cable

• User Manual

Safety Precauons

• Please read this User Manual carefully and follow all instrucons.

• To avoid damage or malfuncon of the speaker do not drop it from high locaons and/or on

to hard surfaces, do not place heavy objects on it.

• Keep speaker away from humidity, water and other liquids. If it does get wet, do not operate

as this may cause an electrical shock, explosion and damage to the device or to the user.

• Do not place or keep this product near heat sources, such as direct sunlight, radiators, stoves

or any other apparatus that produces heat. This may cause an explosion, degrade the

performance and/or reduce baery life.

• Do not modify, repair or disassemble device (especially the baery). Doing so will void the

warranty. The baery in this device may present a risk of ﬁre or chemical burns if misused or

tampered with.

• Use only supplied and manufacturer-approved chargers and unplug this device when not in

use for long periods of me or during lightning storms.

Summary of content (5 pages)

PAGE 1
Vivitar® Inﬁnite BS-C26 Bluetooth® Speaker User Guide Thank you for purchasing the Vivitar® Inﬁnite BS-C26 Bluetooth® Speaker. Introduction With this speaker, you will enjoy listening to high quality music wirelessly using Bluetooth® technology. Easily connect to any mobile device for both conversation and music listening. It also pairs with other Bluetooth-enabled devices (Bluetooth V2.1+EDR speciﬁcation and HSP, HFP, A2DP and AVRCP proﬁles). Speciﬁcations • Bluetooth Speciﬁcation: V2.
PAGE 2
FCC and IC Statement Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modiﬁcations to this equipment. Such modiﬁcations could void the user's authority to operate the equipment.
PAGE 3
Disconnect the BS-C26 from the power supply as soon as the battery is fully charged, overcharging would reduce the service life of the battery. A charged battery will lose its capacity if it is not used on a regular basis. Important: Ensure that the battery is fully charged if you do not use the device for a long period of time. To avoid a complete discharge of the battery, the BS-C26 should be charged at least once every 6 months.
PAGE 4
illuminate, ﬂashing red and blue alternately. The device is now in pairing mode. 3. Find the Bluetooth® setting of your mobile phone and start the search for Bluetooth® devices. (For further details, please read the operating instructions of your mobile phone). 4. From the list of devices found, select your speaker "Vivitar SP". 5. If required, enter the PIN code "0000" and conﬁrm the entry.
PAGE 5
• Speciﬁcally exempt from any warranty are limited-life consumable components subject to normal wear and tear such as batteries, decorates and other accessories. • Supplier is not responsible, for failure resulting from accident, abuse, misuse, or any unauthorized repair, or modiﬁcation. • Modiﬁcation and repair of the unit should be done by an authorized and qualiﬁed service center or returned to the manufacturer.