User's Manual

8. Using Your Earphones During Phone Calls
Last Number Redialing
Quickly tap on the Answer button twice and the last number that you dialed will
be redialed.
Answering an Incoming Call
To answer an incoming call, quickly press the Answer button.
Ending a Call
To end a call, quickly press the Answer button.
Reject an Incoming Call
Press and hold the ANSWER button for a few
seconds to reject an incoming call.
Adjusting Volume
By pressing the Volume Up or Volume Down
buttons you can increase or decrease the
volume of the phone call.
7. Listening to Music
Play/Pause
Press the Power button to get music from your audio source to play or pause.
Next/Previous Song
Press and hold the Volume Up or Volume Down buttons to advance to the
next song or go back to the previous one.
Increase/Decrease Volume
Repeatedly tap the Volume Up or Volume
Down buttons to increase or decrease the
volume.
NOTE: Music will automatically pause when
a call is dialed out or when there is
an incoming call. It will resume when
the call ends.
6. Wearing Your Earphones
For the best sound performance and a secure, comfortable fit, be sure that
the ear buds rest gently in your ear and drape around the back of your neck.
Use the ear caps that works best for you.
5. Pairing Your Earphones With a Bluetooth Phone
-To power on your earphones, press and hold the Power button for
approximately 3-5 seconds. Once powered on, you will hear your
earphones audibly say "Powering on, welcome to ALTEC
LANSING".
-Immediately after powering on your earphones, the LED Indicator
Light will alternately flash red and blue to indicate that your
earphones are ready to be paired.
-Go to the Bluetooth Manager on your phone.
Search Bluetooth devices and select "Altec Sport" to start
connecting. Once paired, the LED Indicator Light will slowly flash
blue every few seconds.
4. Powering ON/Powering OFF Your Earphones:
-Press and hold the Power button for approximately 3-5 seconds to power on
your earphones. Your earphones will automatically connect with the last
phone they were paired with if they have previously been paired.
-Once powered on, you can press and hold the Power button again for
approximately three seconds to power o your earphones.
NOTE: In order to save power, your
earphones will automatically power
o if left unpaired and idle for
several minutes.
3. Charging: When charging, a red LED light will illuminate. When the battery is
fully charged, the red indicator light will turn o. Your earphones can
take up to two hours to fully charge.
2. For a look at the various buttons and parts of your earphones,
view the graphic below.
1. Make sure the following items are
included in your package.
12:12 PM
Bluetooth
Bluetooth
Devices
Paired
ON
Now discoverable
Altec Sport
~3-5 Seconds
~3 Seconds
Indicater
① Earloop
② Free Bit Ear Tips
③ LED Indicator Light
④ Charging Port
⑤ Volume +/Next Track
⑥ Power/Answer
⑦ Volume –/Previous Track
⑧ Microphone
R L
1 2
3
4
5
6
7
8
Ear Caps
USB Cable
R L
IN-EAR EARPHONES
WATERPROOF
Item # MZX399
Quick Start Guide