User's Manual

cable to charge the headphones.
Connect the USB cable to a computer USB port and the
USB plug to the charging jack of the headset. The red
LED light will illuminate while the earphones are
charging A full charge of the battery takes around 2
hours. When the battery is fully charged, the LED light
will turn blue.
Disconnect the headset at this point. The headset will
then be ready for use.
When the battery is low, the LED will flash red and emit
three tones every 20 seconds. When this occurs, please
recharge the headset.
When using your earphones with an iPhone, the top
right corner will indicate your ear bud's battery life.