SH5B Bluetooth® Headset User manual -1-
1. Notice Before Using Thank you for purchasing the Bluetooth® Headset SH5B. Please read this User's Manual completely before you use the Headset. SH5B designed for listening the high quality music wirelessly that based on the latest Bluetooth® wireless technology. SH5B can be easily connected to a mobile phone for call conversation and music listening, it is also capable to connect to the other Bluetooth®-enabled devices like Notebook, iPod etc. SH5B is compliant with Bluetooth V3.
. Package Contents List Please inspect this package and refer to the package contents list below to verify all items were included in this package: 1) SH5B Bluetooth® headset(1) 2) USB Charging Cable(1) 3) User's Manual(1) 4. SH5B Bluetooth® Headset Overview ① ① ② ③ ④ ⑤ ⑥ Volume + Answer / Play/ Pause/ Indicator LED Next Track Microphone Charging Port Volume Previous Track 5. Battery information The device is equipped with an integrated lithium-polymer battery. The battery cannot be replaced.
until after two or three complete charging-discharging cycles. The battery can be charged and discharged several hundred times, but it loses its capacity over time. Disconnect the SH5B from the power supply as soon as the battery is fully charged, overcharging would reduce the service life of the battery. A charged battery will lose its capacity if it is not used on a regular basis. Important: Ensure that the battery is fully charged if you do not use the device for a long period of time.
- The fully charged battery has power for up to 6 hours of talk-time and 5 hours music playing time, and up to 240 hours of standby time. However, the talk and standby times may vary when used with different mobile phones or other compatible Bluetooth® devices, usage settings, usage styles, and environments. When the battery power is low, the headset will remind you by voice prompt "Battery low" every 20 seconds, and the red indicator light starts to flash.
2) 3) 4) 5) Press and hold the Power button for about 5 s, the indicator light will flashes red and blue intermittently, the device is now in pairing mode. Find the Bluetooth® setting of your Mobile phone and start the search for Bluetooth® devices. (For further details, please read the operating instructions of your Mobile phone). From the list of devices found, select the "SH5B". If required, enter the PIN code "0000" and confirm the entry.
connect to the phone you last connected automatically. Please ensure your phone's Bluetooth® function is active. Turn off the headset Press and hold Power button for 5s to turn off the headset. Note: To conserve power, if the headset is not connected to a device for approximately 10 minutes, the headset will turn off automatically. 9. Using for music play Play/Pause Press Play/Pause button to get the music play or pause.
At standby status, double press the ANSWER, the last number you dialed will be re-dialed. Note: the last number re-dialing is available only for the first device if two Mobile phones are connected. The connection sequence can be determined by reconnect manually. Answering a call Press ANSWER shortly to answer the incoming call. Reject an incoming call Press and hold ANSWER for 2 seconds to reject the incoming call.
Mute While a call is in progress, Press Volume - button for 2s to mute the headset, a remindful tone would be heard every 10 seconds. Repeat the operation to un-mute. 11. Safety and general information 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) Please read this User's Manual carefully and follow all instructions. To avoid any damage or malfunction of the device do not drop the device from high places. Keep device away from humidity, water and any other liquid.
12. FCC Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
13. EC Declaration of Conformity Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
as follows: Warranty is non-transferable and is limited to the original purchaser only. - You must be able to prove the date of original purchase of the unit with a dated receipt. - The warranty is not applicable if the product has been subject to physical abuse, improper installation, modification or repair by an unauthorized third party. - Supplier's responsibility shall be limited to the repair or replacement of the product at its sole discretion.
