SBT516 Bluetooth® Headset User manual -1-
1. Notice Before Usin Thank you for purchasing the Bluetooth® Headset SBT516. Please read this User's Manual completely before you use the Headset. SBT516 designed for listening the high quality music wirelessly that based on the latest Bluetooth® wireless technology, it is built‐in MP3, AAC and apt‐X low latency codec for high quality audio streaming.
. Package Contents List Please inspect this package and refer to the package contents list below to verify all items were included in this package: 1) SBT516 Bluetooth® headset(1) 2) USB Charging Cable(1) 3) User's Manual(1) 4.
5. Battery information The device is equipped with an integrated lithium‐polymer battery. The battery cannot be replaced. Do not attempt to remove the battery from the device since it would damage the device. The full performance of a new battery is not achieved until after two or three complete charging‐discharging cycles. The battery can be charged and discharged several hundred times, but it loses its capacity over time.
4) When the battery is fully charged, the red indicator light will turn blue. Disconnect the charger from the headset and the outlet. The headset is ready to use. NOTE: ‐ For first time use, please charge the headset fully. ‐ The fully charged battery has power for up to 5 hours of talk‐time and 4hours music playing time, and up to 240 hours of standby time.
7. Pair to your Bluetooth® phone Before you use your headset the first time, you must pair the unit with a Bluetooth® enabled mobile phone. Pairing is a one‐time process and required only for the first connection with the Mobile phone. The SBT516 can be connected with two mobile phones simultaneously. [General procedure ] 1) 2) 3) 4) 5) Keep the SBT516 within 1 meter range of a Bluetooth®‐ready Mobile phone.
of the SBT516 with two mobile phones. After paring successfully with 2 mobile phones, switch off the headset and switch on again, the headset will connect to both 2 mobile phones automatically. Otherwise, you can connect the headset on the cellphone manually. 8. Turning headset on /off Turn on your headset Slide the power switch to On to turn on your headset.
Increase/Decrease volume Push toggle switch to increase or decrease volume. Note: The SBT516 supports A2DP profile that allows stereo music streaming from a Bluetooth phone. The music will pause automatically while a call is dialed out/incoming, and resume when the call conversation has ended. 10. Using for phone call Last number re‐dialing At standby status, double press the ANSWER, the last number you dialed will be re‐dialed.
Call‐waiting ‐ If there is an incoming call while a call is in progress, press ANSWER shortly to accept the waiting call and end current calling. ‐ If there is an incoming call while a call is in progress, press and hold ANSWER for 2 seconds to accept the incoming call and place the current call on hold. Note:The same operation could be performed in case of Multi‐connection. Volume adjusting Push toggle switch to increase or decrease volume.
6) 7) 8) 9) this will void the warranty. Do not place heavy objects on the device. Use only the supplied and approved chargers. Unplug this device when unused for long periods of time or during lightening storms. The battery used in this device may present a risk of fire or chemical burn if mistreated. 10) 12. FCC & IC Statement Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
or TV interference, caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. This product is CE certified according to the provision of the R&TTE Directive (99/5/EC). This declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Please note that this product uses radio frequency bands not harmonized within EU.
‐ Supplier is not responsible, for failure resulting from accident, abuse, misuse, or any unauthorized repair, or modification. ‐ Modification and repair of the unit should be done by an authorized and qualified service center or returned to the manufacturer. ‐ This warranty gives you specific legal rights, and you may also have other rights, which vary under local laws.
