MODEL G328A This product is not designed, manufactured, sponsored or endorsed by Sony Computer Entertainment Inc. or any of its divisions. PS3™ is a trademark of Sony Computer Entertainment Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Gioteck is under license. Specification & appearance are subject to change without prior notice. Copyright © 2010 GBB Group. All Rights Reserved.
thank you features & details Thank you for purchasing the EX-02s Next Gen Bluetooth® Headset from Gioteck. We hope that this product will go beyond your expectations for a quality accessory. Please read this booklet thoroughly before using the product and review the PS3™ manual for additional details regarding PS3™ operation.
pairing your headset 1. Within the Settings' menu, press X on Accessory Settings. 2. Press X on the icon labelled: Manage Bluetooth® Device. 3. Press X on Yes to register your Bluetooth® Device. 7. Press X to enter 0000 (four zeros) 8. You will be taken to a new screen stating: Register completed. as the Pass Key and press X on OK. 5. Press X to Start Scanning. Once the scan is complete, the PS3™ will recognize all Bluetooth® wireless technology devices within range. 6.
reversing the earhook The EX-02s ships with two earhooks, each marked [L] for the left ear and [R] for the right ear. After selecting the appropriate earhook, follow the instructions below: EARHOOK HOLES EARHOOK PINS Using your fingernail, carefully pry the faceplate off the headset upwards and forwards. 06 | REVERSING EARHOOK Lift clear from the body. Noting the 4 earhook pins, gently pull away the existing earhook, and store safely.
charging your headset operating your headset The headset contains a rechargeable Lithium-ion battery. Prior to using the headset for the first time, it is strongly recommended to fully charge the battery for 2 hours. Connect the USB cable to your PS3™ (01) and insert the DC connector (02) into the headset (03). The LED will illuminate red during the charging process and will be blue when fully charged.
troubleshooting care & maintenance Having trouble with your EX-02s Next Gen Bluetooth® Headset? These troubleshooting steps will show you the smoothest path to resolving your issue. Be sure to perform troubleshooting before having your product serviced. This product has been designed with the highest concern for safety. However, any electrical device, if used improperly, has the potential to cause harm. To help ensure risk-free operation please pay attention to the guidelines below.
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
