Operator's Manual

Introduction
0000679 | 18.12.2020 DC-Air™ Operator’s Manual 5 | 30
1 INTRODUCTION
1.1 About the DC-Air™
DC-Air™ is the world’s first wireless intraoral sensor that uses the latest Bluetooth® 5.0 communication
standards for reliable and rapid transmission of radiographic images. DC-Air™ is also the world’s first intraoral
X-ray sensor to utilize direct-conversion X-ray technology which converts X-ray photons directly into digital
image data without scintillating photons into visible light. This process ensures the highest possible Modulation
Transfer Function (MTF), a measure expressing true resolution and sharpness, that is natively achieved.
Manufacturer information:
ATHLOS OY
Klovinpellontie 1-3, Tower 2
02180 Espoo, FINLAND
[e-mail]
Tel. [phone]
1.2 Intended Use
DC-Air™ is intended to be used for a radiographic examination by a dental professional to assist in the
diagnosing of diseases of the teeth, jaw, and oral structures.
The DC-Air™ sensor is a digital wireless sensor that is intended to acquire dental intraoral radiographic images.
The DC-Air™ sensor shall be operated by healthcare professionals, who are educated and competent in
performing the acquisition of dental intraoral radiographs. The DC-Air™ sensor is used in combination with
special positioning devices to facilitate positioning and alignment with the X-ray beam.
1.2.1 Additional Information on Use of DC-Air™
DC-Air™ is for use as prescribed by physicians, physician assistants, registered nurses, or other qualified medical
personnel trained in the use of the system.
1.3 Contraindications
This device is not designed, sold, or intended for use except as indicated.
1.3.1 Warnings, Cautions and Notes
Alerts the operator that failure to follow the procedure could cause damage to the equipment or loss of
data.
Alerts the operator that failure to follow the procedure could result in bodily harm or death.