Operator's Manual

Set-Up Instructions
0000679 | 18.12.2020 DC-Air™ Operator’s Manual 15 | 30
3 SET-UP INSTRUCTIONS
3.1 Connecting the DC-Air™ Docking station
Place the DC-Air™ docking station in desired location on a countertop. Connect the USB cable provided in the
package of the docking station to the USB port on the docking station and to the USB port in your PC or laptop.
The DC-Air™ connection cables have a length of 2m (~6ft.). Other lengths may be available. Ask technical
support for options.
3.2 Pairing the DC-Air™ Sensor with Docking Station
The DC-Air™ sensor is delivered as factory-paired to its docking station. The sensor and the docking station it
has been paired with are identified with a common number indicating that they are paired and ready for use.
3.3 Calibration
The DC-Air™ sensor is factory-calibrated. The calibration folder is available in a memory flash provided with
the sensor and its docking station. When connecting the DC-Air™ to the PC or laptop for the first time, and
when changing the previously used PC or laptop to another, insert the flash memory into a USB port on the PC
when prompted by the third-party Imaging Software.