User's Manual

1716
3. Maintaining Your Riescope:
Disassembling or cleaning the scope internally will void the
warranty. If the scope requires repairs, please refer to the war-
ranty section for complete instructions.
The external optical surfaces should occasionally be wiped
clean. Use the lens cloth provided or an optical quality lens
paper to wipe out dust or dirt on the external lens surface. If
large sand particles or heavy dirt contamination is observed,
remove using soft brush or by blowing them away. Apply lens
cleaning liquid before wiping o. Always keep the protective
lens covers in place when the scope is not in use to avoid dust
collecting on the surface of the lenses. Store the unit in a
low-humidity environment.
4. Trouble Shooting Tips - Inaccuracy Issues
i. Check scope mounting and make sure there is no movement
when pulling the scope by hands. Tighten the mounts if there
is any movement observed.
ii. Use a bench rest or sandbag to support the barrel and stock
when making windage and elevation adjustments. This will
help eliminate movement.
iii. It is recommended using the same type of ammunition with
same weight.
iv. Check your rie stock, as a loose stock changes the point of
impact.
v. Make sure your rie chamber and barrel are clean
vi. Make sure riing of the barrel is not damaged and no exces-
sive grease inside the barrel
vii. For any technical related questions, please contact Athlon Op-
tics at [e-mail] or call toll free 1-855-913-
5678
a)
b)