User's Manual
54
action of the gun. Attach bases and the bottom of the rings to
your rie. Be sure to follow the manufacturer instructions sup-
plied with the rings and mounting base.
a) Scope Dimensions
b) Focusing the Scope
The purpose of the Fast Focus eyepiece is to focus the reticle
in the scope to your eyes. For a fast focus eyepiece, just simply
rotate the fast focus ring at the end of the eyepiece in either
direction to get a perfect clear reticle while looking through the
scope pointing at a at plane surface. This is important to do prior
to mounting.
c) Adjust for Maximum Eye Relief
i. You need to adjust the scope for maximum eye relief before
tightening of the scope rings, to avoid injury from recoil.
ii. With the scope on lowest magnication, move the scope for-
ward as far as possible in the rings.
iii. With the rie in normal shooting position, look through the
scope and slowly slide the scope back towards you. When you
nally see the full eld of view with sharp and clear edges,
stop. Make sure the scope has not rotated so the reticle is tilted.
iv. Rotate the scope until the elevation dial is at the top of the
scope and the vertical crosshair of the reticle matches the ver-
RIFLESCOPE
MODEL
L1 L2 L3 L4 L5 L6 D1 D2
1-4x24 FFP 9.8 / 6.2 3.6 2.3 2.4 1.8 1.2
6-24x50 FFP 14.1 4.2 6.2 3.7 2 2.1 1.8 2.2
8-34x56 FFP 15.5 4.9 6.9 3.7 2 2.9 1.8 2.5
Fast Focus Ring
L1
L6
L2 L3 L4
L5
D2 D1