User's Manual

1514
3. Maintaining Your Riescope:
Disassembling or cleaning the scope internally will void the war-
ranty. If the scope requires repairs, please refer to the warranty
section for complete instructions.
The external optical surfaces should occasionally be wiped
clean. Use the lens cloth provided or an optical quality lens pa-
per to wipe out dust or dirt on the external lens surface. If large
sand particles or heavy dirt contamination is observed, remove
using soft brush or by blowing them away. Apply lens cleaning
liquid before wiping o. Always keep the protective lens covers
in place when the scope is not in use to avoid dust collecting
on the surface of the lenses. Store the unit in a low-humidity
environment.
4. Trouble Shooting Tips - Inaccuracy Issues
i. Check scope mounting and make sure there is no movement
when pulling the scope by hands. Tighten the mounts if there is
any movement observed.
ii. Use a bench rest or sandbag to support the barrel and stock
when making windage and elevation adjustments. This will help
eliminate movement.
iii. It is recommended using the same type of ammunition with
same weight.
iv. Check your rie stock, as a loose stock changes the point of im-
pact.
v. Make sure your rie chamber and barrel are clean
vi. Make sure riing of the barrel is not damaged and no excessive
grease inside the barrel
vii. For any technical related questions, please contact Athlon Optics
at [e-mail] or call toll free 1-855-913-5678
a)
b)