User's Manual
54
Fast Focus Ring
facturer instructions supplied with the rings and mounting base.
a) Focusing the Scope
b) Focusing the Scope
The purpose of the Fast Focus eyepiece is to focus the reticle in the
scope to your eyes. For a fast focus eyepiece, just simply rotate the
fast focus ring at the end of the eyepiece in either direction to get a
perfect clear reticle while looking through the scope pointing at a at
plane surface. This is important to do prior to mounting.
c) Adjust for Maximum Eye Relief
i. You need to adjust the scope for maximum eye relief before
tightening of the scope rings, to avoid injury from recoil.
ii. With the scope on lowest magnication, move the scope forward
as far as possible in the rings.
iii. With the rie in normal shooting position, look through the scope
and slowly slide the scope back towards you. When you nally
see the full eld of view with sharp and clear edges, stop. Make
sure the scope has not rotated so the reticle is tilted.
iv. Rotate the scope until the elevation dial is at the top of the scope
and the vertical crosshair of the reticle matches the vertical axis
of the rie. This will be easier if you nd a vertical reference such
as the straight edge of a building or a telephone pole. Make sure
the scope has not moved forward or backward while doing this.
v. Tighten the rings per the manufacturer’s instructions.
RIFLESCOPE
MODEL
L1 L2 L3 L4 L5 L6 D1 D2
1-4X24 SFP 9.2 / 5.6 3.6 1.9 2.6 1.8 1.2
4-14X44 FFP 12.9 3.9 5.0 4.0 1.4 2.0 1.7 1.8
D2 D1