Instruction manual

I n s t a l l a t i o n

Figure 2. Case Dimensions

Prior to mounting the controller in your panel, make sure that

the cutout opening is of the right size, and deburred to enable

a smooth fit. A minimum of 4" (100 mm) of depth behind the

panel is required.

Figure 3. Series 18/19/25 Controller Mechanical Compo-

nents (Series 25 shown)

BEZEL

PANEL

MOUNTING CATCH

GRIP

CASE GASKET

I n s t a l l a t i o n

Figure 1. Recommended Panel Layout for Multiple Con-

trollers

Measurements between

centerlines of panel

cutouts are minimum

recommended.

4.700"

( 119.4 mm)

4.300" (109.2mm)

2.850"

(72.4 mm)

4.300" (109.2mm)

2.850"

(72.4 mm)

Recommended Panel Cutout

3.622" SQ (92 mm SQ)

Recommended Panel Cutout

3.622" x 1.772"

(92 mm x 45 mm)

Note: Measurements between centerlines of panel cutouts are minimum recommended.

Series

Series 18 Series 19