Instruction manual

4746
Limit Contro l l e r
Option ED
Parameter Descriptions (continued)
Menu “02”
Display Parameter Allowable Values
ALSP Alarm setpoint 0 to 8191
SPLo Setpoint low Dependent on sensor range
(lower setpoint limit)
SPHI Setpoint high Dependent on sensor range
(upper setpoint limit)
Available Communications Settings
Display Description
Baud Rate Parity Data Bits Stop Bits
24.n.8. 2400 none 8 1
12.n.8. 1200 none 8 1
6.n.8. 600 none 8 1
3.n.8. 300 none 8 1
24.o.7. 2400 odd 7 2
12.o.7. 1200 odd 7 2
6.o.7. 600 odd 7 2
3.o.7. 300 odd 7 2
Limit Contro l l e r
Option ED
Parameter Descriptions (continued)
Menu “03”
Display Parameter Allowable Values
Idno Device ID number 00 to 99
(remote communications)
bAUD Baud, parity and See next page under the
data bit selection heading of “Available
Communications Settings”
CALL Calibration low Preset at factory
CALH Calibration high Preset at factory