Instruction manual

Select in the list "Operand A" the address of the parameter that wants to

be used like first operand: the admitted addresses are between 1 and

256 (modbus) or between 0 and 255 (jbus); besides are visualize the

variabled (VAR_1..VAR_16) and the constants configured

(CONST_1..CONST_16).

Select in the list "Operator" the symbol of the desired operation; the

possible operations are: sum (+), subtraction (-), multiplication (*),

division (/), greater than (>) and less than (<).

Select in the list "Operand B" the address of the parameter that wants to

be used like second operand: the admitted addresses are between 1

and 256 (modbus) or between 0 and 255 (jbus); besides are visualized

the variable (VAR_1..VAR_16) and the constants configured

(CONST_1..CONST_16).

Press the button "OK" confirm the immission or press the button

"CANCEL" to cancel the immission.

For modify the operands of an operation previously introduced, select it

with a click of the mouse.

Press the button "Modify".

Is visualized the window "Math Pack Edit" with the values of the selected

operation.