Instruction manual

13.13 Configuration of the Master communications (only X5000)

Select the menu "Math/ Master". Is visualized the window "Master

Communications and Math Editor".

Select the card "Master Communications".

Select in the list "Slave Address" under "Write To" the address of the

device on which you want to transfer the parameter.

To insert a new connection activate the button "Add".

Select in the list "Slave Address" under "Read From" the address of the

device from which a parameter wants to be read (N.B. the admitted

addresses are between 1 and 247; 256 is the address of the device

master!).

Select in the list "Datum Address" under "Read From" the address of the

parameter that wants to be read on the device.

N.B. The admitted addresses are between 1 and 256 (modbus) or

between 0 and 255 (jbus); besides are visualized the variable

(VAR_1..VAR_16) and the constants configurated

(CONST_1..CONST_16).