Instruction manual

69
Simultaneously when saving the binary format of the configuration, the
program writes, with the same path, a text file which includes the
configuration parmeters.
13.9 To recall a previously stored file
To recall a previously stored file, click on ‘File’ and then ‘Open’, or click
on the open ‘icon’ at the top of the window. In either case, an ‘Open’
window will appear, which will list all previously stored file names with the
file extension appropriate to the controller as listed above. Click on the
file required and then click ‘OK’. The file can be downloaded to a
controller if required, as described above.