Installation manual

Series C Controller Configuration and Operation Manual
1-6  Athena Controls, Inc. 900M050U00
1.3.2 Configuration
In addition to the operating displays associated with the control modes described in 1.3.1
above, the 16C, 18C, and 25C can display configuration parameters. The parameters
are grouped by purpose and organized in menus. Instructions for viewing and changing
configuration parameter values are in 2.4.8.
Attention
Before accessing the menu system (or changing a parameter
value using a remote host), we recommend putting the controller
in standby mode as described in 2.4.3 (or in the manual supplied
with the host software).