Manualshelf

Installation manual

ManualsBrandsAthena ManualsComputer equipmentC.5
161162163164165166167168169170
Series C Controller Configuration and Operation Manual
17-4 Athena Controls, Inc. 900M050U00
17.3 Disabling the Keypad
To disable the keypad entirely, remove the JMP03 jumper from the processor board. The
processor board is the board on the left when facing the controller. Refer to the
illustration below for the location of JMP03. (This illustration shows the bezel and circuit
board assembly as viewed from below.)
JUMPER AS SHOWN ENABLES KEYPAD ACCESS.
TO DISABLE KEYPAD ACCESS, REMOVE JUMPER.