Installation manual

Changing the Security Access Level
900M050U00 Athena Controls, Inc. 17-3
17.2 Procedures
17.2.1 To View the Access Level
To view the access level when the PV and SV are displayed:
1. Press and hold the key for approximately ten seconds. (After the first three
seconds a menu name will be displayed on the top line. Ignore it and continue to
press the key.) The display will show the access level label AcLuAcLu and the
access level now in effect. For example, if the controller is set to “user” level, the
display will show:
AcLuAcLu
USErUSEr
2. What you do next depends on whether the present access level is OK.
If you do not want to change the access level, press the key once to go back to
the PV and SV display.
If you do want to change the access level, follow the instructions in 17.2.2.
17.2.2 To Change the Access Level
To change the access level when the current access level is on display:
1. Use the or key to step through the list of access level choices.
2. When the desired access level is on display, press the key to write the new
access level to the controller’s database and return to the PV and SV display.