Installation manual

Series C Controller Configuration and Operation Manual
17-2  Athena Controls, Inc. 900M050U00
Displayed
Abbreviation
Access
Level Description
CnF9CnF9
configuration All the “user” functions, and access to all menus except
calibration.
When the access level is “configuration”, the keypad can be
used to perform all controller functions and access all
menus, except the calibration menu.
FACtFACt
factory Access to everything.
When the access level is “factory”, the keypad can be used
to do all controller functions, including re-calibrating the
controller.
The controllers are calibrated at the factory. Usually the
controllers will never need re-calibration. See 5.2 for the
circumstance that dictates re-calibration. Do not leave the
controller set to this access level after you have re-
calibrated the controller.