Installation manual

Identifying Numbers in Multi-Comm Messages and Athena Plus Protocol
900M050U00  Athena Controls, Inc. 15-5
Code Parameter Name
Used
By Read/Write
Where
Described
B3 Output 2 Cycle Time all R/W 7.4.2
B4 Output 2 Low Limit all R/W 7.4.3
B5 Output 2 High Limit all R/W 7.4.3
B6 RTD and T/C Decimal
Position
all R/W 6.2.1
B7 Linear Decimal Position all R/W 6.3.1
B8 Display Filter
all except
1ZC
R/W 6.2.2 and 6.3.2
B9 Display Units all R/W 6.2.3
C1 Display Blanking all except
1ZC
R/W 6.2.4 and 6.3.3
C2 Alarm 1 Action
all except
1ZC
R/W 9.2.1
C3 Alarm 1 Operation all except
1ZC
R/W 9.2.2
C4 Alarm 1 Delay all except
1ZC
R/W 9.2.3
C5 Alarm 1 Inhibit
all except
1ZC
R/W 9.2.4
C6 Alarm 1 Process Alarm
Setpoint
all except
1ZC
R/W 9.2.5
C7 Alarm 1 Deviation, Normal
Band, Inverse Band Setpoint
all except
1ZC
R/W 9.2.5
C8 Alarm 2 Action
all except
1ZC
R/W 9.2.1
C9 Alarm 2 Operation
all except
1ZC
R/W 9.2.2
D0 Alarm 2 Delay all except
1ZC
R/W 9.2.3
D1 Alarm 2 Inhibit
all except
1ZC
R/W 9.2.4
D2
Alarm 2 Process Alarm
Setpoint
all except
1ZC
R/W 9.2.5
D3 Alarm 2 Deviation, Normal
Band, Inverse Band Setpoint
all except
1ZC
R/W 9.2.5
D4 Communication Protocol all R See Note 1
D5 Controller ID (Address) all R/W
14.5.2 and
14.6.2
D6 Communication Baud Rate all R/W 14.5.3 and
14.6.3
D7 Communication Data Format all R/W 14.6.4
D8
Communication Transmit
Delay
all R/W 14.6.5