Installation manual

Option Parameters
900M050U00  Athena Controls, Inc. 14-3
14.3 Summary of Option Parameters
Item Parameter Name When Displayed
OptnOptn (option) menu; see 14.4
CardCard
Installed Option Card
always; the choice made here determines
the other option menus that are displayed.
The choices available in the option menu
depend on the controller model.
nonenone none
d.Ind.In digital input
dI.ALdI.AL digital input with alarm
ALrALr alarm
A.OutA.Out auxiliary analog output
rASrAS remote analog setpoint
Sc.dISc.dI serial communications with
contact/digital input
SerLSerL serial communications
SerLSerL (serial) menu for RS-232 or RS-485 Athena Plus protocol; see 14.6
IdnoIdno
Controller ID Number
bAUdbAUd
Baud Rate
dAtFdAtF
Data Format
trdLtrdL
Transmission Delay
This menu is displayed if you chose SerLSerL
as the card type and the communication
firmware supports the Athena Plus protocol.
If the menu is displayed, then all the
parameters shown here are included.
SerLSerL (serial) menu for MODBUS protocol; see 14.5
IdnoIdno
Controller ID Number
bAUdbAUd
Baud Rate
ParPar
Parity
nnOdnnOd
MODBUS IEEE Register
Ordering
This menu is displayed if you chose SerLSerL
as the card type and the communication
firmware supports the MODBUS protocol. If
the menu is displayed, then all the
parameters shown here are included.