Installation manual

Series C Controller Configuration and Operation Manual
13-2  Athena Controls, Inc. 900M050U00
13.3 Menu Items
Parameter Name
: Calibration Low (see Note 1 below)
Name as Displayed
:
CALoCALo
Used By:
all
When Displayed:
always
Description:
Displays the temperature input value that should be simulated
during low calibration.
Beware! Pressing the or key while this is on display
will clear the controller’s existing zero offset and initiate the low
calibration, even if you have not prepared the controller as
described in Section 18. If the controller has not been prepared
correctly before you initiate calibration, the resulting calibration
will be invalid.
Parameter Name
: Calibration High (see Note 1 below)
Name as Displayed
:
CAHiCAHi
Used By:
all
When Displayed:
always
Description:
Displays the temperature input value that should be simulated
during high calibration.
Beware! Pressing the or key while this is on display
will clear the controller’s existing span adjustment and initiate the
high calibration, even if you have not prepared the controller as
described in Section 18. If the controller has not been prepared
correctly before you initiate calibration, the resulting calibration
will be invalid.
Note 1: The Athena Plus protocol does not permit you to read this value.