Installation manual

Series C Controller Configuration and Operation Manual
11-12  Athena Controls, Inc. 900M050U00
11.4.3.3 Specifying the Setpoint for Each Soak in a Multi-Step Recipe
Parameter Name:
Soak Level 1, Soak Level 2 etc. through Soak Level 8
(58 though 65)
Name as Displayed
:
SL1SL1, SL2SL2 through SL8SL8
Used By:
all controllers
When Displayed:
if the recipe option is eight-segment r/s recipe
Range:
SPL.LSPL.L to SPH.LSPH.L (setpoint low limit to setpoint high limit from input
menu) (See Note 1 below.)
Default:
77
Description:
Used to specify the setpoint for the soak for each segment.
Each segment can use a unique soak level.
Effect on Other
Parameters:
No effect on other configuration parameters. Does affect the
setpoint used by the controller.
Note 1: The range is reduced if the value of the dSPLdSPL (display) menu dEC.PdEC.P (decimal
position) parameter is not 0 (zero). See 4.3.2 for more information about the effect of a
linear input on numerical ranges.
11.4.3.4 Specifying the Length of Each Soak in a Multi-Step Recipe
Parameter Name
: Soak Time 1, Soak Time 2 through Soak Time 8
(66 through 73)
Name as Displayed
:
St1St1, St2St2 through St8St8
Used By:
all controllers
When Displayed:
if the recipe option is eight-segment r/s recipe
Range:
0 to 9999 minutes
Default:
0
Description:
Used to specify the length of the soak time for each segment.
Each segment can use a unique soak time.