Installation manual

Series C Controller Configuration and Operation Manual
11-4  Athena Controls, Inc. 900M050U00
11.2 Specifying the Recipe Option
Parameter Name
:
Recipe Option (40)
Name as Displayed
:
r.Optr.Opt
Used By:
all controllers
When Displayed:
if at least one output type is on/off or PID
Choices:
disdis disabled
8.r.S8.r.S eight-segment ramp/soak recipe
S.SP.rS.SP.r single-setpoint ramp
Default:
disabled
Description:
Used to choose the ramp/soak function (if any) to be used.
Effect on Other
Parameters:
The choice made here affects what other parameters are
displayed in the ramp/soak menu.
What’s next after specifying the recipe option?
If you chose “disabled”, go to Section 12 to configure the
Supervisor menu parameters.
If you chose “single-setpoint ramp”, go to 11.3.
If you chose “eight-segment ramp/soak recipe, go to 11.4.