Installation manual

Series C Controller Configuration and Operation Manual
11-2  Athena Controls, Inc. 900M050U00
Item Parameter Name When Displayed
r.Optr.Opt
Recipe Option always (assuming the menu is displayed
because an output is available for control)
s.s.r.ts.s.r.t
Single-Setpoint Ramp Time if recipe option is single-setpoint ramp
HLd.bHLd.b
Recipe Holdback always
tEr.StEr.S
Recipe Termination State always
rcY.nrcY.n
Recipe Recycle Number if recipe option is eight-segment r/s recipe
PF.rEPF.rE
Resume from Power Failure if recipe option is eight-segment r/s recipe
rt1rt1
Ramp Time 1 if recipe option is eight-segment r/s recipe
rE1rE1
Ramp Event 1 if recipe option is eight-segment r/s recipe
and at least one alarm has been reserved
for use by the ramp/soak function
35
SL1SL1
Soak Level 1 if recipe option is eight-segment r/s recipe
St1St1
Soak Time 1 if recipe option is eight-segment r/s recipe
sE1sE1
Soak Event 1
if recipe option is eight-segment r/s recipe
and at least one alarm has been reserved
for use by the ramp/soak function
rt8rt8
Ramp Time 8 if recipe option is eight-segment r/s recipe
rE8rE8
Ramp Event 8
if recipe option is eight-segment r/s recipe
and at least one alarm has been reserved
for use by the ramp/soak function
SL8SL8
Soak Level 8 if recipe option is eight-segment r/s recipe
St8St8
Soak Time 8 if recipe option is eight-segment r/s recipe
SE8SE8
Soak Event 8
if recipe option is eight-segment r/s recipe
and at least one alarm has been reserved
for use by the ramp/soak function
35
Use the alarm 1 action and/or alarm 2 action in the alarm menu to reserve alarm(s) for use by the
ramp/soak function.