User Manual

XBee® Wi-Fi RF Modules
© 2012 Digi International, Inc. 14
Agency Approvals
Specification XBee Wi-Fi Through-hole XBee Wi-Fi Surface Mount
United States (FCC Part 15.247) FCC ID: MCQ-XBS6B FCC ID: MCQ-S6BSM
Industry Canada (IC) IC: 1846A-XBS6B IC: 1846A-S6BSM
Europe (DC) ETSI ETSI
Australia Pending Pending
Brazil Pending Pending
Japan Pending Pending
FCC Approval (USA) Refer to Chapter 12 FCC Requirements. Systems that contain XBee Wi-Fi modules inherit Digi
Certifications.
Pin Signals
Pin Assignment for the XBee Wi-Fi Through-hole module
(Low-asserted signals are distinguished with a lower case n before the signal name.)
Pin # Name Direction Default State Description
1 VCC - - Power Supply
2 DIO13/DOUT Both Output UART Data out
3 DIO14/Din/nConfig Both Input UART Data In
4 DIO12/SPI_MISO Both Output GPIO/ SPI slave out
5 nRESET Input Module Reset
6 DIO10/PWM0 Both GPIO
7 DIO11/PWM1 Both GPIO
8 reserved - Disabled Do Not Connect
9 DIO8/nDTR/SLEEP_RQ Both Input Pin Sleep Control line /GPIO
10 GND - - Ground
11 DIO4/SPI_MOSI Both GPIO/SPI slave In
12 DIO7/nCTS Both Output
Clear-to-Send Flow
Control/GPIO
13 DIO9/On_nSLEEP Output Output Module Status Indicator/GPIO
14 VREF Input - NC
15 DIO5/Associate Both Output Associate Indicator/GPIO
16 DIO6/nRTS Both Input
Request-to-Send Flow
Control/GPIO
17 DIO3/AD3 /SPI_nSSEL Both
Analog Input/GPIO/SPI Slave
Select
18 DIO2/AD2 /SPI_CLK Both Analog Input/GPIO/SPI Clock
19 DIO1/AD1 /SPI_nATTN Both
Analog Input/GPIO/SPI
Attention
20 DIO0/AD0 Both Analog Input/GPIO