User Manual
DCC Features:
The decoder provided with the Genesis
TM
Challenger
Locomotive will operate with any NMRA compatible DCC
system. The default setting is address 3. The decoder is rated
at 2 amps and will support either 2 or 4 digit addresses. The
decoder functions are fully programmable by the adjustment
of CVs. A CV table is included in the operating instructions.
Either 14 speed steps or 28/128 speed steps are supported by
this system. Available accessory and sound functions are as
follows:
• Directional Lighting • Bell
• Whistle • Air Release
• Coupling • Brake Squeal
• Conductor’s Voice • Fire Box Door
• Sound On/Off • Sand Release
• Water Injector • Blower Hiss
• Cylinder Cock/Flange squeal
In addition to Function Ø (Directional lighting) there are
twelve additional sound functions to allow the operator to
capture the full range of unique sounds found on an operating
steam locomotive. You can now fully immerse yourself in the
complexities of prototype operation and add a new level of
realism to your railroading experience.
Dual-Function decoder is made by Model Rectifier Corpora
-
tion for Athearn, Inc.
The installation of sound in a locomotive adds a new dimen-
sion to operation. Sound makes a technically perfect static
model come alive and enhances the experience of operation.
You will find that you will no longer ‘run’ the engine but,
rather, operate it in the context of your layout. Whether you
are using conventional DC control or a DCC system, the
incorporation of advanced electronic technology will provide
the ultimate railroading experience.
The Genesis
TM
Challenger Locomotive includes a factory
installed DCC and sound board with speakers. The board
is mounted in the tender. The DCC decoder automatically
senses the power supply type (either DC or NMRA compli-
ant DCC system) that is being used and will operate without
intervention from the user.
Hand-Held Wireless Controller
Included with the Challenger locomotive is a hand-held wire
-
less controller. When operating on conventional DC, this con-
trol unit is designed specifically to allow control of the speed
and direction of the locomotive as well as these six individual
sound functions:
• Bell • Whistle
• Water Injector • Air Release
• Blower Hiss • Fire Box Door
These are more sound features than have been previously
available to the conventional DC sound user in any format.
The Genesis
TM
Challenger Locomotive will operate on DC
without the use of this hand held, however, only the steam
chuff sounds will be available in this operational mode.
S o u n d a n d D C C F e a t u r e s
LED Indicator
Whistle
Bell
Stop
AccelerateDecelerate
Direction
The 12-volt transmitter battery # A23-12, is available at any
electronics or office supply store.