Instruction Manual
Assembly Guide
Step 1. Take out the playeld, legs, and 8 [SA] screws. Put the playeld upside down on a soft
surface. Attach the legs to the main cabinet and insert 8 [SA] screws to the matching holes with [a]
hex key.
B
Key
Step 3. Take out the backglass and the included [b] key. Use the key to open up the rear
panel on the backglass.
Hex key (included)
a
C
A
SA
A
C
Wrench (not included)
Step 2. Position the playeld upright. Use the [c] wrench to adjust the height of the playeld to
your liking. Tighten the base screws when set.
b
c
5