Instruction Manual

Step A. Use Phillips head screwdriver to fasten the cam bolt onto the panel. To avoid

insufficient length to connect the cam lock, please do not overtighten it.

Step B. When attaching two panels, please make sure the cam bolts align with the holes.

Step C. Insert the cam locks to the matching holes.

Step D. Tighten clockwise with straight head screwdriver.

Step 1. Insert the 16 [S1] screws to the matching holes on [A] and [B] on both panels

with a Phillips head screwdriver. Please insert and make sure to tighten perpendicular to

board (redo this step as needed). Do not use excessive force or you risk breaking the

panels.

Step A

Cam Bolt

Arrow

Cam Lock

Straight head

screwdriver

Phillips head

screwdriver

Step B Step C Step D

Phillips head screwdriver

ASSEMBLY STEPS

•

HOW TO USE THE CAM BOLT KIT