Instruction Manual

Step 13. Tighten [S8] on the
bracket [M] against the top
back side of the cabinet.
6
5
6
L
M
M
M
N
S8
S7
Step 14. Drill holes
against the wall and
insert plastic anchors [L]
into the holes firmly.
Step 15. Tighten [S7]
on the bracket [M]
against the wall.
Step 16. Fasten the cable
tie [N] to connect both
brackets [M] to keep the
cabinet from tipping over.
ASSEMBLY STEPS
WARNING
Serious or fatal crushing injuries can occur from tip-over.
To help prevent tip-over:
• Do not set any heavy objects on top of the cabinet.
• Never allow children to climb or hang on the cabinet.
Use of tip-over restraints may only reduce but not
eliminate the risk of tip-over.