Installation Instructions

High-intensity laser beams generate extremely high temperatures and a lot of heat
ÖŦóųŮŮğĽēòųŢĽŦŮěýŦųòŦŮŢÖŮýšųÖĽŮğŮƒ澳ýDžÖğĽĻÖŮýŢğÖĵŦĻÖƒóÖŮóěǁŢýùųŢğĽēóųŮŮğĽē澴
creating gas and smoke. Do not leave the machine unattended during the engraving
şŢŅóýŦŦ澳ĒŮýŢųŦý澴òýŦųŢýŮŅóĵýÖĽųşŮěýŦųĽùŢğýŦÖĽùğĽǃÖĻĻÖòĵýŦğĽŮěý
ĻÖóěğĽý澳ĵƌÖƒŦıýýşÖĽÖƋÖğĵÖòĵýǁŢýýƑŮğĽēųğŦěýŢĽýÖŢòƒŮŅýĽŦųŢýŦÖĒýŮƒ澳ªěýĽ
ųŦğĽēÖĵÖŦýŢýĽēŢÖƋýŢ澴ŮěýĻÖŮýŢğÖĵēýĽýŢÖŮýŦĒųĻýŦ澴ƋÖşŅŢŦ澴şÖDžğóĵýŦ澴ÖĽùŮŅƑğó
materials in plastics and other combustible materials. These smog or air pollutants
may harmful to health.
When installing the equipment, make sure that the workplace must be clean and
ŮěÖŮŮěýŢýÖŢýĽŅǃÖĻĻÖòĵýŅŢýƑşĵŅŦğƋýğŮýĻŦ澳ŦěýýŮŅĒĻýŮÖĵĻųŦŮòýşĵÖóýùųĽùýŢ
the bottom when engraving or cutting.
When using the laser engraving machine, it is recommended to wear laser safety
goggles. Avoid skin exposure to type 4 beams, especially at close range. Youth aged
òýŮƌýýĽ滶滷瀲滶滽ĻųŦŮěÖƋýşÖŢýĽŮÖĵŦųşýdžğŦğŅĽùųŢğĽēųŦý澳%ŅĽŅŮŮŅųóěŮěýĵÖŦýŢ
engraving module when the machine is on.
ÖųŮğŅĽŦ濧濧濧
01
02
03
°ŅųóÖĽŦóÖĽŮěýóŅùýŮŅǁĽùŮěýğĽŦŮÖĵĵÖŮğŅĽŮųŮŅŢğÖĵ澳
- 03 -