Datasheet

VC010 / VC060 / VC080 User Manual

4. (Optional) To edit the VC010 / VC060 / VC080 system settings through

the RS-232 port, connect the hardware / software controller here using the

provided RS-232 Configuration Cable.

This completes the basic installation of the VGA/DVI/HDMI EDID Emulator.

You may now power on the display and source devices.

Installing the RS-232 Controller

You can access and configure the VC010 / VC060 / VC080 EDID Wizard AP

through the RS-232 serial interface. Use the RS-232 configuration cable and

connect one end to the VC010 / VC060 / VC080 RS-232 port, and the other

end to the serial port of your PC.

Note: To configure the VC010 / VC060 / VC080 through the EDID Wizard,

see page 10.

HDMI Output Device

HDMI Source Device

VGA

Source Device

VGA Output Device

DVI

Source Device

DVI Output Device

VC010

VC060

VC080