User manual

Chapter 2. Hardware Setup
27
For the KN2124v, KN2140v, KN4124v, KN4140v, KN2116v, KN2132v,
KN4116v, and KN4132v when using a single power socket, be sure to turn
on the correct power switch (see Power Switch, page 17). When using both
power sockets, either of the power switches can be used to turn on the
KVM switch. To enable dual power, turn on both power switches.
Note: If you are connecting the power to a UPS or an ALTUSEN PN9108/
PN0108, be sure to use the utility power cords supplied with your
package instead of standard power cords.
After the KVM Over the NET™ switch is cabled up you can turn on the power.
After it is powered up, you can turn on the servers.
KN2124v / KN2140v / KN4124v / KN4140v
Single Stage Installation Diagram
9
7
1
6
3
2
2
4
5
Modem
PN0108
8
b
y A
TEN
PS/2 CPU MODUL
E
MODEL
NO. KA9120
PS/2 CPU MODUL
E
MODEL
NO. KA9120
LIN
K