User manual

KVM Over the NET™ User Manual

KVM Adapter Cables

 Cat 5e (or higher) cable is required to connect the KVM Over the NET™

switch to the KVM Adapter Cables (see page 25).

 The following KVM Adapter Cables are required for use with the KVM

Over the NET™ switch:

Note: 1. The KVM Adapter cables marked with an asterisk (*) are for use with

the KN2124v, KN2140v, KN4124v, KN4140v, KN2116v, KN2132v,

KN4116v, and KN4132v switches only.

2. If you use Adapter Cables purchased prior to your switch purchase,

you may have to upgrade the Adapter’s firmware. (see page 198).

Function Module

Connect to devices with PS/2 ports KA9120 / KA7120

Connect to devices with USB ports

(All platforms – PC, Mac, Sun)

KA9170 / KA7170

Connect to Sun Legacy Computers KA9130 / KA7130

Connect to serial based devices KA9140 / KA7140

For USB computers – DVI output, Virtual

Media and Smart Card Reader support

KA7166

For USB computers – HDMI output, Virtual

Media and Smart Card Reader support

KA7168

For USB computers – DisplayPort output,

Virtual Media and Smart Card Reader support

KA7169

Connect to devices with USB ports and virtual

media support

KA7175*

Connect to devices with USB ports, virtual

media and audio support

KA7176*

Connect to devices with USB ports, with virtual

media, smart card reader support

KA7177*