User manual

- 15 -
Hotkey Summary Table
[Scroll Lock] [Scroll Lock]
[Enter]
Switches the KVM and audio focus from the
port that currently has the KVM focus to the
other port(1 to 2; 2 to 1).
Note: The KVM and audio focus both go to
this port even if they were on different ports
to begin with.
[Scroll Lock] [Scroll Lock]
[K] [Enter]
Brings only the KVM focus from the port
that currently has it to the other port. The
audio focus remains where it is.
[Scroll Lock] [Scroll Lock]
[S] [Enter]
Brings only the audio focus from the port
that currently has it to the other port. The
KVM focus remains where it is.
[Scroll Lock] [Scroll Lock]
[A] [Enter]
Starts Auto Scan Mode. The KVM focus
switches from port to port at 5 second
intervals.
[1, 2, 3, or 4] Once Auto Scan Mode begins, the scan
interval can be changed at any time by
keying in the number that represents the
desired scan interval.
[Scroll Lock] [Scroll Lock]
[B] [Enter]
Toggles the Beeper on and off.
cs-1262_2007-08-27.fm Page 15 Wednesday, September 19, 2007 2:33 PM