cs-1262_2007-08-27.
cs-1262_2007-08-27.fm Page 2 Wednesday, September 19, 2007 2:33 PM FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
cs-1262_2007-08-27.fm Page 3 Wednesday, September 19, 2007 2:33 PM CS-1262 User Manual Online Registration You can register your product at our online support center: International – http://support.aten.com North America – http://www.aten-usa.com/ product_registration Online Support Online technical support is available to ATEN customers through our support center: International – http://support.aten.com North America – http://www.aten-usa.com/support.
cs-1262_2007-08-27.fm Page 4 Wednesday, September 19, 2007 2:33 PM Package Contents The CS-1262 package contains the following items: 1 CS-1262 Two Port DVI + Audio KVM Switch 2 Custom KVM Cables 1 Power Adapter (DC 5.3V; 2.4A) 1 User Manual* 1 Quick Start Guide Check to make sure that all the components are present and that nothing got damaged in shipping. If you encounter a problem, contact your dealer.
cs-1262_2007-08-27.fm Page 5 Wednesday, September 19, 2007 2:33 PM Overview The Master View CS-1262 improves on previous KVM Switch designs by incorporating DVI video and audio. Now, two computers can be accessed and controlled from a single PS/2 keyboard, DVI monitor, and PS/2 mouse console. DVI (Digital Visual Interface) supports both digital video input (flat panel displays, data projectors, plasma displays, digital TVs and set-top boxes) and analog video input (traditional monitors and TVs).
cs-1262_2007-08-27.
cs-1262_2007-08-27.fm Page 7 Wednesday, September 19, 2007 2:33 PM Requirements Console A DVI monitor A PS/2 mouse A PS/2 keyboard Computers The following equipment must be installed on each computer that is to be connected to the system: A DVI video port A 6-pin mini-DIN (PS/2 style) mouse port A 6-pin mini-DIN (PS/2 style) keyboard port Cables Only CS Custom cable sets specifically designed to work with this switch may be used to link to the computers.
cs-1262_2007-08-27.fm Page 8 Wednesday, September 19, 2007 2:33 PM Components Front Panel 1&2 No. Component Description 1 Port Selection Press a pushbutton to bring the KVM and Pushbuttons Audio focus to the computer attached to its respective port. 2 Port LEDs The Port LEDs are built into the Port Selection Pushbuttons.
cs-1262_2007-08-27.fm Page 9 Wednesday, September 19, 2007 2:33 PM Rear Panel 1 2 3 No. Component Description 1 Console Port Section The cables from your keyboard, monitor, mouse, microphone, and speakers plug in here. Each port is color coded and marked with an appropriate icon. 2 KVM Port Section The cables that link the switch to your computers plug inhere. Each KVM Port section is comprised of a keyboard, DVI video, mouse, microphone, and speaker port.
cs-1262_2007-08-27.fm Page 10 Wednesday, September 19, 2007 2:33 PM Installation 1. Make sure that the power to all the devices you will be installing has been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function. 2. Make sure that all devices you will be installing are properly grounded.
cs-1262_2007-08-27.fm Page 11 Wednesday, September 19, 2007 2:33 PM 4. Plug the power adapter that came with your switch into an AC power source, then plug power adapter cable into the switch’s Power Jack.
cs-1262_2007-08-27.fm Page 12 Wednesday, September 19, 2007 2:33 PM Operation Hot-Plugging The CS-1262 supports hot-plugging – components can be removed and added back into the installation by unplugging and replugging their cables without the need to shut the unit down. Powering Off and Restarting If it becomes necessary to Power Off the Master View unit, before starting it back up you must do the following: 1. Shut down all the computers that are attached to the switch. 2.
cs-1262_2007-08-27.fm Page 13 Wednesday, September 19, 2007 2:33 PM Port Switching There are two convenient methods to switch the KVM and Audio focus between the computers: Manual – which involves pressing the port selection pushbuttons located on the unit’s front panel; and Hotkey – which involves entering combinations from the keyboard.
cs-1262_2007-08-27.fm Page 14 Wednesday, September 19, 2007 2:33 PM Auto Scanning: The CS-1262’s Auto Scan feature automatically switches the KVM focus between the two computer ports at regular intervals. This allows you to monitor the computer activity without having to take the trouble of switching from port to port manually. See the table below for details.: Hotkey Action [Scroll Lock] [Scroll Lock] Starts Auto Scan Mode. The KVM focus [A] [Enter] switches from port to port at 5 second intervals.
cs-1262_2007-08-27.fm Page 15 Wednesday, September 19, 2007 2:33 PM Hotkey Summary Table [Scroll Lock] [Scroll Lock] Switches the KVM and audio focus from the [Enter] port that currently has the KVM focus to the other port(1 to 2; 2 to 1). Note: The KVM and audio focus both go to this port even if they were on different ports to begin with. [Scroll Lock] [Scroll Lock] Brings only the KVM focus from the port [K] [Enter] that currently has it to the other port. The audio focus remains where it is.
cs-1262_2007-08-27.fm Page 16 Wednesday, September 19, 2007 2:33 PM Appendix DVI Pin Assignments Pin Signal Pin Signal 1 TMDS Data2- 16 Hot Plug Detect 2 TMDS Data2+ 17 TMDS Data0- 3 GND 18 TMDS Data0+ 4 N.C. 19 GND 5 N.C. 20 N.C. 6 DDC Clock 21 N.C. 7 DDC Data 22 TMDS Clock Shield 8 Analog Vertical Sync. 23 TMDS Clock+ 9 TMDS Data1- 24 TMDS Clock- 10 TMDS Data1+ C1 Analog Red 11 GND C2 Analog Green 12 N.C. C3 Analog Blue 13 N.C. C4 Analog H. Sync.
cs-1262_2007-08-27.
cs-1262_2007-08-27.fm Page 18 Wednesday, September 19, 2007 2:33 PM Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM THE DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION.
