User manual

- 7 -
Components
Front View
1. Port Selection / Auto Scan Switch:
This pushbutton has two functions:
 It toggles access back and forth between the computers.
 It activates / deactivates Auto Scan Mode. Holding this
switch down for 2 seconds activates Auto Scan Mode;
pressing and releasing the switch while Auto Scan Mode is
active turns Auto Scan Mode Off.
2. Port LEDs:
A LED lights to indicate that its corresponding port is the one
that has the KVM focus. If the LED flashes, it indicates that
the port is being accessed under Auto Scan Mode.
3. USB Ports:
The Console USB Keyboard and USB Mouse plug in here.
Note: Other peripherals can plug in here, as well. With USB,
any peripheral can plug into any port.
cs102u.fm Page 7 Friday, June 6, 2008 3:42 PM