User manual

CN8000 User Manual

ANMS

The Advanced Network Management Settings page allows you to set up login

authentication and authorization management from external sources. It is

divided into several sections, each of which is described in the sections that

follow.

IP Installer

The IP Installer is an external Windows-based utility for assigning IP addresses

to the CN8000.

Click one of the radio buttons to select Enable, View Only, or Disable for the

IP Installer utility. See page 163for IP Installer details.

Note: 1. If you select View Only, you will be able to see the CN8000 in the IP

Installer’s Device List, but you will not be able to change the IP

address.

2. For security, we strongly recommend that you set this to View Only

or Disable after using it.