User manual

5. The Windows Client
43
The functions that the icons perform is described in the table below.:
Icon Function
Click to bring up the Hotkey setup dialog box (see Hotkey Setup,
page 44 for details).
Click to bring up the Video Settings dialog box.
Click to toggle the remote display between grayscale and color.
Click to bring up the Virtual Media dialog box. The red X indicates
that the function has not been started. The icon changes when a
virtual media device is started to indicate the type of device being
used. See Virtual Media, page 47, for specific details.
Click to open the Message Board.
Click to send a Ctrl+Alt+Del signal to the remote system.
Click to enable an on-screen keyboard. Click the arrow to drop down
a list of available language keyboards to select from.
Click to exit the remote view.
These icons show the Num Lock, Caps Lock, and Scroll Lock status
of the remote computer.
 When the lock state is On, the LED is bright green and the lock
hasp is closed.
 When the lock state is Off, the LED is dull green and the lock hasp
is open.
Click on the icon to toggle the status.
Note: When you first connect, the LED display may not be accurate.
To be sure, click on the LEDs to set them.
Click to display information about the Widnows Client version.
cn8000.book Page 43 Tuesday, July 1, 2008 4:18 PM