User manual

4. Administration

(Continued from previous page.)

Parameter Explanation

USB IO

Settings

OS When connecting to a computer or KVM switch with the

USB connector for keyboard and mouse I/O, drop down

the list to select the platform it uses. Choices are PC,

Mac1, Mac2, and Sun. Default is PC.

Note: In general, Mac 1 works best with older Mac OS

versions, whereas Mac 2 works best with newer ones.

This may vary, however. If you encounter problems with

one setting, try selecting the other one.

Language When connecting to a computer or KVM switch with the

USB connector for keyboard and mouse I/O, drop down

the list to select the keyboard language it uses.

Reset Some configuration changes only take effect after a

CN8000 reset. These include changes on the Network

page; a Log Server port change; enabling/disabling

browser access; and upgrading the firmware.

For those changes, a check is automatically put in the

Reset on Exit box.

To have the changes take effect, log out and then log back

in again. A wait of approximately 30 to 60 seconds is

necessary before logging in following the reset.

Note: If the CN8000’s performance degrades, reset it by

putting a check in the Reset on Exit box, and then log out /

cn8000.book Page 37 Tuesday, July 1, 2008 4:18 PM