User manual

CN8000 User Manual
34
(Continued from previous page.)
An explanation of the profile items is given in the table below:
 The Reset button clears all the information shown in the right panel.
 When you have made all your changes, click Apply.
Item Explanation
Username A minimum of 6 and a maximum of 16 characters is allowed.
Password A minimum of 6 and a maximum of 16 characters is allowed.
Confirm Password To be sure there is no mistake in the password you are asked to
enter it again. The two entries must match.
Description Additional information about the user that you may wish to
include.
Permissions Click to place/remove a check mark next to an item to
grant/withhold access to that aspect of the CN8000’s operation.
Win Client: Checking Win client allows a user to access the
CN8000 via the Windows Client software.
View Only: Checking View Only allows a user to view the video
of the display of the computers attached to the ports of the KVM
switch connected to the CN8000, but they are not allowed to
perform any operations on the computers.
Power Management: Checking Power Management allows a
user to Power On / Power Off / Reset devices via an attached
Power Over the NET™ unit.
Virtual Media: Checking Virtual Media allows a user to utilize
the CN8000’s Virtual Media capabilities (see Virtual Media,
page 47 for details).
Java Applet: Checking Java Applet allows a user to access the
CN8000 via the Java Applet software.
Configure: Checking Configure gives a user Administrator
privileges, and allows the user to set up and modify the CN8000's
operating environment.
Log: Checking Log allows a user to view the contents of the log
file.
cn8000.book Page 34 Tuesday, July 1, 2008 4:18 PM